Naturals Roller Blinds

Your roller blinds can fit either outside or inside your window. There are three options when ordering. You can either select recess or exact which will be made to your measurements including your brackets, meaning the fabric will be 35mm smaller than your original measurements. However, if you select cloth size, the fabric will be made to these sizes but your overall blind will be 35mm wider than your measurements.

Yes! Our roller blinds can help to reduce the amount of heat that can come through your windows. As our products are made to measure, you are assured there are no gaps for the heat to escape from.

There are two ways your roller can face - Standard or Reverse. Standard rolls towards the window which is how your blind will arrive if you order with us. However, if you would like Reverse, which is where the roll goes away from the window, please let us know by calling or emailing customer support

The easiest way to clean your roller blinds is to remove it from the bracket and roll them fully out till you can see the barrel. You can then use a vacuum to remove all the dust and then use a clean damp cloth. If you need a stain removed, use warm soapy water and lightly remove the stain.

A) Follow these instructions if you want your blind to fit inside the recess:

1. Measure the width of the recess from wall to wall in three places as shown. Then take the shortest measurement as your width.
2. Measure the drop by measuring from the top of the recess to the window sill in three places then take the shortest measurements as your drop.
3. Please note: of any obstructions like tiles, dado rails, skirting boards that may alter the actual width of the recess.
4. Select Recess Fitting when ordering.

B) Follow these instructions if you want your blind to fit outside the recess:

1. Decide how much you want the blind to overlap, then provide the exact measurements of the width you’d like your blind to be, including the brackets – meaning your cloth will be 35mm shorter.
2. Decide how much you want the blind to overlap, then provide the exact measurements of the drop you’d like your blind to be.
3. Select Exact Fitting when ordering.

C) Follow these instructions if you know the measurements for your cloth/fabric:

1. Measure how wide you want the cloth and then provide the exact measurements for this.
2. Measure the drop for the cloth and then provide the exact measurements for this.
3. Please note: the overall blind will be 35mm wider than your measurements due to the brackets and mechanisms.
4.   Select cloth fitting when ordering.